Terasic TR4 User Manual Download Page 4

Page: 4 / 104

TR4 User Manual

www.terasic.com

March 30, 2017

Chapter 1

Overview

This chapter provides an overview of the TR4 Development Board and details the components and

features of the board.

The TR4 Development Board provides the ideal hardware platform for system designs that demand

high-performance, serial connectivity, and advanced memory interfacing. Developed specifically to

address the rapidly evolving requirements in many end markets for greater bandwidth, improved

jitter performance, and lower power consumption, the TR4 is powered by the Stratix® IV GX

device and supported by industry-standard peripherals, connectors and interfaces that offer a rich set

of features that is suitable for a wide range of compute-intensive applications.

The advantages of the Stratix® IV GX FPGA platform with integrated transceivers have allowed

the TR4 to be fully compliant with version 2.0 of the PCI Express standard. This will accelerate

mainstream development of PCI Express-based applications and enable customers to deploy

designs for a broad range of high-speed connectivity applications.

The TR4 is supported by multiple reference designs and six High-Speed Mezzanine Card (HSMC)

connectors that allow scaling and customization with mezzanine daughter cards. For large-scale

ASIC prototype development, multiple TR4s can be stacked together to create an

easily-customizable multi-FPGA system.

Summary of Contents for TR4









































































































Search results

Summary of Contents for TR4

Reviews:

Related manuals for TR4

Brands by name

Popular brands

Terasic TR4, User Manual

Search results

Summary of Contents for TR4

Reviews:

Related manuals for TR4

Brands by name

Popular brands