5
The MDR-X’s status LED indicates when the system is ON and provides the system’s current status
during operation.
AUX PORT MODES
A compatible controller is connected directly to the MDR-X’s IN-1 port, disabling the wireless functionality.
The Status LED on both devices will turn BLUE to indicate that a connection has been established.
Wired Mode
A compatible Slave controller (thumbwheel, zoomrocker, or Smartknob) is connected directly to one of the
MDR-X AUX ports, and can be configured to control any available axis (Focus, Iris, etc.).
Knob or Rocker Mode (Slave Controllers)
AUX port configuration
Navigate to RX CONFIG, and select the corresponding mode for the device (Wired, Knob, or Rocker).
Connect a 5-pin cable from the device (controller, smartknob, zoomrocker, or thumbwheel) to one of
MDR-X’s AUX ports.
2
1
MDR-X STATUS LEDS
• OFF - Unit is powered off
• YELLOW - No wireless connection
• RED - Camera is recording
• ORANGE - PC/Bootloader mode
• WHITE - Checking RF module status
• GREEN - Wireless connection established
• BLUE - Wired-mode connection established
Summary of Contents for MDR-X
Page 1: ...MDR X Quick Start Guide...
