Connect the motor(s) to MDR-X’s motor inputs
(A)
using a 4-pin to 4-pin cable. The motor(s) will
then begin calibrating.
2
3
Attach the motor(s) to the rods/lens.
Connect power to MDR-X’s PWR port
(C)
.
1
Turn the hand controller on.
4
3
POWER AND CONNECT
Wireless Pairing via Controller
Wireless Pairing via MDR-X
Select the same channel number as the controller to begin pairing.
Press the MENU button on MDR-X, then navigate to WIRELESS>CHANNEL.
2
1
Navigate to WIRELESS>FIND RECV to scan for active receivers and automatically pair. The LED
on the controller and receiver will turn green once paired.
Press the MENU button on the controller.
2
1
PAIR MDR-X AND CONTROLLER
If the controller has not been paired to a receiver, you can use one of the following methods to pair
both devices:
Summary of Contents for MDR-X
Page 1: ...MDR X Quick Start Guide...
