Press the REC button on the controller to start/stop recording on the camera.
2
NOTE: If using a RED camera, the camera serial communication setting must be set to RCP
(Redlink Command Protocol) for the unit to operate.
Connect a camera cable from the CAM port on the MDR-X to the camera, then navigate to
MENU>CAMERA to indicate which camera you have connected.
1
CAMERA RUN/STOP
4
Connect a 5-pin connector from the controller’s wired-mode input to MDR-X’s IN-1 port
(B)
. The
LED on both the controller and MDR-X will turn blue once paired.
Wired Pairing (Wired Mode)
Press the MENU button on MDR-X, then navigate to the RX CONFIG>IN-1 MODE menu.
2
1
Select WIRED mode.
3
Summary of Contents for MDR-X
Page 1: ...MDR X Quick Start Guide...
