Teracom T2-B-Gawv1.4U10Y-BI, User Manual

Page: 91 / 131

User Manual for T2-B-Gawv1.4U10Y.BI
Teracom Limited 88 An ISO Certificed Company
request of the terminal. After disposing, the information is transmitted to the
super-level router. The system acts as a proxy for its hosts after you enable IGMP
proxy.
3.6.2 IPv4 Routing
3.6.2.1 Static Routing
Choose Services > IPv4 Routing and the following page appears. In this page,
you can configure static route and dynamic routing. A default route is used to send
IP packages of unknown destination address to the default gateway. The default
route defines the IP address where all data is forwarded.
The following table describes the parameters of this page.
Field Description
Destination The IP address that packets are sent to.
Netmask
The subnet mask of the destination IP
address.
Gateway The gateway that the packets pass by during