Teracom T2-B-Gawv1.4U10Y-BI, User Manual

Page: 129 / 131

User Manual for T2-B-Gawv1.4U10Y.BI
Teracom Limited 126 An ISO Certificed Company
1483R. The IP address is 20.1.1.1. The IP address of the uplink port is
10.61.92.157. The WAN IP address of the modem is assigned as 20.1.1.2. The PC
to the modem is assigned with a private IP address (in the same segment as the
management IP address 192.168.1.1). The NAT function of the modem is enabled
and the private address of the PC is translated to the public address 139.1.1.*
(2~254) dynamically assigned by BRAS for access to ISP.
The IP address of the PC can be fixed (as in this example) or assigned through
DHCP server of the modem. If it is assigned by DHCP server, the DHCP functions
of the modem must be enabled. The IP address of the DHCP address pool is
192.168.1.* (2~254). The functions are enabled by default and the PC is configured
to obtain IP and DNS addresses dynamically.
Setting
1) Open the network browser and enter 192.168.1.1 in the address bar to log in to
the modem.
2) Choose Configuration > Internet Connection > Connections . Set VPI/VCI to
8/81, and click Next .
3) In the Configure Connection Type page, select RFC 1483 protocol. Set the
encapsulation type to LLC/SNAP and the encapsulation mode to Routed . Click
Next .
4) In the Configure WAN IP Settings page, enter WAN IP Address, WAN Subnet
Mask, and Default Gateway provided by your ISP. Select Enable NAT and Add
Default Route , and click Next .
WAN IP Address : 20.1.1.2
WAN Subnet Mask : 255.255.255.0
Default Gateway : 20.1.1.1
5) Check the network configuration and ensure that all the settings are consistent
with the data provided by your ISP. Then click
Apply .
In Confiugre WAN IP Settings page, besides entering WAN IP address, WAN
subnet mask, DNS server addresses, and selecting enable NAT, you must select
Add Default Route . Otherwise, you have to add the static modem manually. If you
need to modify the LAN IP address and DHCP server information, you can operate
in the Local Network (LAN) page and DHCP Server page.
After the configuration is done, WAN-side interface of the the modem is R_0_32.
4.6 External PPPoE Dial-up Mode