Teracom T2-B-Gawv1.4U10Y-BI, User Manual, Page: 116 / 131

User Manual for T2-B-Gawv1.4U10Y.BI
Teracom Limited 113 An ISO Certificed Company
Some of the attributes displayed in the Wireless Port Configuration page can
be set from the CLI. Enter port wireless set ? . The attributes is displayed as
the output of this command. Its function depends on the configuration of the
DSLAM and the capability of the central office the modem connected to.
3.9 Admin
Click Admin to enter system admin page. On the left page, there are seven options:
Firmware Upgrade , Back & Restore , Reboot , Remote Access , Lan Access ,
Change Password , and Time Zone .
3.9.1 Firmware Upgrade
Choose Admin > Firmware Upgrade and the following page appears. In this page,
you can upgrade the software of the modem by TEImage.bin file.
Click Browse to select the upgrade file. The upgrade process may take several
minutes.
Note:
If it is not upgraded successfully, do not restart the modem or switch off the
modem. Try to upgrade the image file again until it is successful. If it is
upgraded successfully, restart the modem immediately to take the new software
effect.