Teracom T2-B-Gawv1.4U10Y-BI, User Manual, Page: 12 / 131

User Manual for T2-B-Gawv1.4U10Y.BI
Teracom Limited 9 An ISO Certificed Company
(3) Select the Internet Protocol (TCP/IP) component and click Properties .
(4) The Internet Protocol (TCP/IP) Properties window appears.
(5) Select Obtain an IP address automatically .
(6) Select Obtain DNS server address automatically .
(7) Click OK to save the settings.
Windows NT
(1) Open the Control Panel and click Network .
(2) On the Protocol tab, select the Internet Protocol (TCP/IP) component, and
click Properties .
(3) On the IP Address tab, select the Obtain an IP address automatically option.
(4) On the DNS tab, ensure that no DNS server is defined in the DNS Service
Search Order box and that no suffix is defined in the Domain Suffix Search
Order box.
Linux
(1) Login in to the system as a super user, by entering su in the terminal window.
(2) Enter vi /etc/sysconfig/network-script/ifcfg-eth0 to modify the eth0 network
devices and assign IP addresses.
(3) Enter ifconfig to view the newly assigned IP addresses.
3.1.4 Connection between the Modem and PC
The procedure of checking the connection between the modem and PC is as follows:
(1) Configure the IP address of the PC as 192.168.1.X (2~254), netmask as 255.
255.255.0, and gateway address as 192. 168.1.1 (for a customized version,
configure them according to the actual version).
(2) Enter arp -a in the DOS window to check whether the PC can read the MAC
address of the DSL. See Figure 4.
Figure 4
(3) Ping the management IP address (by default, 192.168.1.1) of the modem.