Teracom T2-B-Gawv1.4U10Y-BI, User Manual

Page: 85 / 131

User Manual for T2-B-Gawv1.4U10Y.BI
Teracom Limited 82 An ISO Certificed Company
transparent. It is prohibited to run the DHCP server and the DHCP relay
simultaneously.
The following table describes the parameters of this page.
Field Description
DHCP Server Address The IP address of the DHCP server to WAN
Interfaces Running
DHCP Relay
DHCP request sends out through this
interface.
Note:
After entering the effective server address in the DHCP server address in the
DHCP Relay Settings page, you must list all interfaces that the DHCP relay
needs to bind to, for both sending and receiving packets. For example, it is not
enough to only bind to a LAN interface (iplan) to receive the requests from the
DHCP clients. It is also necessary to bind a WAN interface.
3.4.7 IPv6 Prefix
Choose Configuration > IPv6 Prefix and the following page appears. In this page,
the prefixes are added to the LAN side interface. Then, the modem advertises
these prefixes in router advertisements on the LAN side. LAN side hosts can auto
configure them using these prefixes. All prefixes are advertised as on-link and
autonomous.