Tequipment Ohaus USB, Instruction Manual

Page: 6 / 52

EN-4 USB Interface
Data sent from the Interface is in standard ASCII format terminated with a [CRLF] (carriage return-
line feed). The output format is as follows:
[weight]
10 characters (right justified)
[space] 1 character
[unit] 5 characters max (left justified)
[space] 1 character
[stability indicator] 1 character “?” when unstable, blank when stable
[space] 1 character
[legend] 10 character TOTAL, hh:mm:ss(time interval), etc.
[CR] 1 character
[LF] 1 character
Output examples: (Note: * and _ indicate spaces)
***** 192.21 _ g - Manual, Continuous or On-Stable printing
******* 0.01 _ g _ ? unstable reading
*******
0.01 _ g ___ 00:00:00 - Interval Printing (example:15sec interval)
***** 176.30 _ g _ ? _ 00:00:15 unstable reading
***** 192.08 _ g _ _ _ 00:00:30
*****
192.21 _ g
***** 207.80 _ g _ TOTAL - Accumulate Mode (Manual printing only)
USB INPUT
The balance will respond to various commands sent via the interface adapter. Terminate the
following commands when with a [CR] or [CRLF].
Scout Pro and Traveler Commands
? print current mode
0A turn Auto-print off
SA Auto-print on, prints on stability
CA Continuous Auto-print
( n)A Auto-print on 1 to 3600 second intervals (n = 1 to 3600)
C perform span calibration
L perform linearity calibration
0M gram mode
1M ounce mode
2M troy ounce mode
3M pennyweight mode
4M parts counting mode
5M pound mode
T tare balance, same as pressing ON-ZERO
V print software version
( Esc ) R reset balance to factory defaults
P same as pressing PRINT
LE print last error code, i.e. [ Err 0 ]
0S print unstable data