Teo 4104, Installation Instructions Manual

Page: 39 / 76

Installation Options
13-280131 Rev. J Page 39
V
V
o
o
i
i
c
c
e
e
M
M
a
a
i
i
l
l
K
K
e
e
y
y
The
VOICE MAIL
key is used to speed dial a voice mail system .
Note: The
VOICE MAIL
key must be programmed to dial the voice mail access number in order for
this feature to work properly. “Smart” pauses and PIN codes can be included in the number.
From the Installation Options menu, select KEYS.
(
MENU →
INSTL
→
KEYS)
Press the
VOICE MAIL
key.
The key's indicator will flash.
Select NUMBER to view or change the
VOICE MAIL
key speed dial number.
This is the number that is dialed to access the voice mail system.
The currently programmed dial string, if any, will be shown in the display.
Enter the voice mail system number with the dial pad.
A # character at the end of the dial string is not required for immediate
dialing; the voice mail key always dials immediately when pressed.
“Smart” pauses are entered with the PAUSE softkey, and are shown in the
display as a
Å
character. The first pause in a dial string will wait until the call
is answered; additional pauses delay dialing for one second per pause. Enter
multiple pauses to increase the delay time. You can use a smart pause to
automatically enter a voice mail PIN code after the voice mail system
answers.
If you need to make corrections while entering numbers, press the Left or Right Arrow
key to move the cursor position, and then select
DELETE to delete the character under
the cursor. CLEAR removes all digits, allowing you to start over.
When all digits have been entered, press the
OK
key.
NUMBER=95551432 ¥ 1234
DELETE CLEAR 123 PAUSE
NUMBER=
DELETE CLEAR 123 PAUSE
VOICE MAIL ACCESS
NUMBER