Teo 4101 Network Administration Manual Download Page 42

Page: 42 / 86

Teo IP Telephone Network Administration Guide

Page 42

13-280132 Rev. Q

SIP Settings

XML Tag

Data / Description

sip_registration

ON/OFF

sip_registration

Determines if registration with the SIP Registrar is

enabled.
If ON is selected, the phone will determine if an IP

address is available for the SIP Registrar; if so, it will

attempt to register with it.
If OFF is selected, registration is not attempted.

(default)

OFF

sip_reg_exp

seconds

sip_reg_exp

The number of seconds that the registration is valid

before the phone must re-register with the SIP Proxy.
Valid range is

7200

seconds (10 seconds to 2

hours) in the form

xxxx

with leading zeros

suppressed.

default value = 3600 (1 hour)

sip_backup_proxy_

addr>

address or name

sip_backup_proxy_

addr>

IP address or server name of the SIP Backup Server or

Redundant SIP Proxy.

address or name

is the default address in IPv4 or

IPv6 format or DNS fully-qualified domain name.

If <

sip_proxy_addr

source= DHCP4

> the address will be

provided by DHCP Option 120, if available.

sip_backup_proxy_port

port number

sip_backup_proxy_port

Port number used by the phone to send SIP signaling

messages, in the form

xxxxx

with leading zeros

suppressed.

1025

–

65534

default value = 5060

sip_backup_reg_id

address or name

sip_backup_reg_id

IP address or domain name of the SIP Registrar when

the Backup Proxy Server is used (most server

implementations combine this into a single SIP server

application).
If left blank or omitted, <sip_backup_proxy_addr> will

be used. This value is used inside SIP message

headers, in the form <line_id>@

<sip_backup_reg_id>:<sip_backup_reg_port>, to

reference the SIP server (e.g.or 1000@teo:5060).

Summary of Contents for 4101






















































































Search results

Summary of Contents for 4101

Reviews:

Related manuals for 4101

Brands by name

Popular brands

Teo 4101, Network Administration Manual

Search results

Summary of Contents for 4101

Reviews:

Related manuals for 4101

Brands by name

Popular brands