1
Attention
1. Foreword
Thanks for choosing our HD conference cameras.Please read this manual carefully before using the product.
2. Notice
·
·Take care of each components of camera during installation, and install camera at where is affordable enough, to avoid drop or
scratches of camera case.
·Handle the camera parts gently, do not squeeze the camera units hard. Please do not touch the camera lens by hand directly to
avoid the lens scratched and image quality affected.
·Do not apply excessive voltage. (Use only the specified voltage) Otherwise, you may get an electric shock or a fire occur.
·Do not aim the camera at the sun or the other high luminous objects,otherwise it may cause image blurring or lens flare, even
cause permanent damage to the camera.
·Do not clean camera with active chemical or corrosive detergents,and remove dust or dirt on the surface of the lens with a
blower (Commercially available)
·Do not disassemble any camera components, in case of abnormal operation; contact your authorized dealer or the store where
you p-urchased the product.
To avoid damage from stress, violent vibration, soaking during transportation,storage and installation.
3. Supplied Accessories
(1) HD conference camera (2) DC12V power supply (3) Ceiling mount (4) Mounting screws
(5) Manual (6) Remote control (7) USB cable
Performance Characteristics
1. Camera technical parameters
Electric
Communication
Input Voltage
Power
Decoder
DC12V
12W
internal
Baud
Protocol
Address Set
9600/38400bps
VISCA/PELCO-D/PELCO-P
1~255
Operation
Surroundings
Operating Environment
Operating Temp
Horizontal Rotation
Vertical Rotation
Rotation Speed
+170°
-
120°
100°/s
0°~+50°
0~95% non-condensing
Physics
Installation Method
Support desktop,wall mount,ceiling mount and tripod installation
Preset Point
Net-Weight
Preset Point: 9 for remote
control,255 for PELCO,64
for VISCA
1.46kg
