42
October 2016
3.4.5 Inter-calibration with software
We assume photometers the data has been downloaded on your computer and
the Aeronet data file, copied to the
AeronetData
folder.
The operation takes place in three steps: choice of photometer calibration data,
choice of reference data and finally, calculations and results display.
These steps are presented in the form of three tabs in the lower part of the
window :
Step 1
: (
Calitoo raw data
) Data of Calitoo to be calibrated.
It consists in choosing the raw data in accordance with the measurement recording
date with the calendar interface.
Step 2
: (
Etalon data
) Data of reference photometer.
Eronet data (For the moment, only Aeronet type is available).
The data files of the photometer calibration in the folder
<username>
/CalitooData/AeronetData
and dated the same day as the
selected in step 1, are displayed in the dropdown menu at right side.
You must confirm your choice by clicking the
Load file
button and go on.
Summary of Contents for CALITOO
Page 49: ...October 2016 49 4 Appendix...
