➢
DELETE MULTI LINK
This function allows to delete the accessory decoder from the multi-link operation.
Press [STOP] button to delete the current accessory # from the current multi link #.
5.
SYSTEM
CONFIGURE: ( SCREEN-18)
5.1)
POWER OFF:
Auto power off timer. If any key pressed, the Power Off timer will restart.
Press ◄ or ► button to set the desired timer value in minute.(1-60min)
5.2)
BRIGHTNESS:
LCD Brightness adjust value.
Press ◄ or ► button to set the desired brightness.
5.3)
CONTRAST:
LCD Contrast adjust value
Press ◄ or ► to desired contrast.
5.4)
KEY TONE:
Press ◄ button: to turn OFF or Press ► button: to turn ON the TX tone .
5.5)
MULTI TX:
When more than one person operating the same receiver,
Set the MULTI TX “ mode to “ON”.
The default setting is “ON”.
Press ◄ button: to turn OFF, Press ► button : to turn ON
5.6)
DCC MANAGER:
When set to OFF: The receiver periodically sends only the current CAB locomotives DCC packets to the main track.
When set to ON: The receiver periodically sends all used CAB locomotives DCC packets to the main track.
Set the DCC MANAGER “ to “ON”.
The default setting is “OFF”.
Press ◄ button: to turn OFF, Press ► button : to turn ON
6.
RADIO SET UP: (SCREEN-19)
6.1)
RADIO SETUP
Select the frequency band channel number from CH12 to CH26.
(It is the same frequency band as the IEEE 802.15.4 standard)
6.2)
GROUP ID:
Use the number keypad to type numbers to the GROUP ID.
If the [STOP] button press, it will set random numbers.
6.3)
RX STATION ID #
:
Press ◄ or ► button to select the ID# from 1 to 10.
6.4)
L
I
NKING:
Press the Link button on the Receiver until the LED on the receiver starts to
flash.
Let go of the link button when the LED on starts to flash,
Press the [STOP] button on the TX and the RADIO LINKING will start.
If the Transmitter linked to the Receiver, the LCD will display “passed”,
otherwise it will displays “Failed”.
7.
CLONE TX: (SCREEN-20)
The CLONE TX function transfers the memory data from the source TX to
destination TX.
7.1)
SOURCE TX:
Select “SOURCE” then Press [STOP] button
7.2)
DESTINATION:
Select “DESTINATION” then Press [STOP] button.
Then wait until both TX are powered OFF. When the transmitters turn ON both
will have the same memory data.
2.4GHz DCC R/C System
<
TENTATIVE>
15
SCREEN-18
SCREEN-20
SCREEN-19
