Tentative 59001, Installation And Operation Manual

Page: 13 / 17

2.3.1) Consist OFF mode:Single Locomotive conrol mode
The current CAB number contains only one locomotive profile number, so you
can control a single locomotive.
Press ◄ or ► button to select the desired locomotive profile number.
2.3.2) UNI: Universal Consist: ( SCREEN-9 )
You can consist locomotive control on the CAB # by adding or deleting the
locomotive profile number.
Press ▲ or ▼ arrow button to select the desired L1(head loco) to L6.
Press ◄ or ► arrow button to adding the locomotive profile number to the
CAB number.
➢
Delete Consist or Change Direction: ( SCREEN-10 )
To delete consist or locomotive direction:
Ppress ▲ or ▼ arrow button to select the desired L1 to L6. Press the [STOP]
button then the LCD changes
to the
L(n) UIN CONSIT menu. (n: Loco #)
Locomotive direction change: Press ◄ or ► arrow button to set desired the
direction.
Delete locomotive from the consist: select DELETE CONSIST then press the
[STOP] button.
Press the MENU button to exit
2.3.3) ADV: Advanced consist: ( SCREEN-11 )
The current CAB # consists of up to 6 locomotives.
Press the [UP] or [DOWN] button to select desired L1 to L6,
then press ◄ or ► button to select the locomotive profile number.
➢
How to change the Advanced Consist Address:
The factory default advanced consist address is assigned the short address
115. You can reassign one of the addresses from 1 to 127.
Select CONSIST MODE [ADV] then press the [STOP] button. Use
the
keypad to type the advanced consist address numbers. The number range
allows from 1 to 127.
☑
How to “ADD” a locomotive to the Advanced Consist: (SCREEN-12)
Press ▲ or ▼ arrow button to select the desired consist locomotive L1 to L6.
Then Press the [STOP] button and the LCD displays
ADV CONSIST ,
To change ADD or DEL function scroll down to ADD/DEL CONSIST (ADD)
and press the [STOP] button.
Press ▼ button and select PROGRAM.
Select TRACK programming mode.
Select WRITE then Press [STOP] button.
☑
How to Delete a locomotive from Advanced Consist: (SCREEN-13)
Press the [STOP] button and select to “DEL”. ADD/DEL CONSIST (DEL)
Press ▼ button and select PROGRAM.
Select WRITE, then press the [STOP] button.
This procedure will clear the CV19=0 and the locomotive advanced
consist
address will be deleted.
2.4GHz DCC R/C System < TENTATIVE> 13
SCREEN-10
SCREEN-11
SCREEN-12
SCREEN-13