Tennant T600e, Service Information Manual, Page: 2 / 231

INTRODUCTION
This manual is available for each new model. It provides
necessary operation and maintenance instructions.
Read this manual completely and
understand the machine before
operating or servicing it.
This machine will provide excellent service. However,
the best results will be obtained at minimum costs if:
• The machine is operated with reasonable care.
• The machine is maintained regularly - per the
machine maintenance instructions provided.
• The machine is maintained with manufacturer
supplied or equivalent parts.
To view, print or download manuals online visit
www.tennantco.com/manuals
PROTECT THE ENVIRONMENT
Please dispose of packaging materials
and used machine components such as
batteries in an environmentally safe way
according to your local waste disposal
regulations.
Always remember to recycle.
Tennant Company
PO Box 1452
Minneapolis, MN 55440
Phone: (800) 553- 8033 or (763) 513- 2850
www.tennantco.com
1-Step, Pro-Membrane, Severe Environment, Zone Settings, Quite-
Mode are US registered and unregistered trademarks of Tennant
Company.
Trojan® and HydroLINK® are registered trademarks of Trojan Battery
Company.
Windows 7® is a registered trademark of the Microsoft Corporation.
This product may contain portions of software that have various 3rd
party licenses. More information can be found at: www.tennantco.
com/opensource
Specifi cations and parts are subject to change without notice.
Original Instructions. Copyright © 2017 Tennant Company. All rights
reserved.
INTENDED USE
The T600e/T600 walk-behind fl oor scrubber is intended
for commercial use, for example in hotels, schools,
hospitals, factories, shops, offi ces and rental
businesses. It is designed to scrub hard fl oor surfaces
(concrete, tile, stone, synthetic, etc.) in an indoor
environment. This machine is not intended for cleaning
carpets or sanding wood fl oors. Use only
recommended pads/brushes and commercially
available fl oor cleaning detergents. Do not use this
machine other than described in this manual.
MACHINE DATA
Please fi ll out at time of installation for future reference.
Model No. - _________________________________________
Serial No. - _________________________________________
Installation Date - ____________________________________
SERIAL NUMBER LABEL LOCATION
UNCRATING MACHINE
Carefully check machine for signs of damage. Report
damages at once to carrier. Contact distributor or
Tennant for missing items.
To uncrate the machine, remove straps, wheel blocks
and shipping brackets. Using the supplied ramp
carefully back the machine off the pallet. Make sure
scrub head is in the raised position.
ATTENTION: Do not remove machine from pallet
without using ramp, machine damage may occur.