Tennant T600e, Service Information Manual

Page: 125 / 231

125 T600/T600e 9016605 (04-2018)
SERVICE
3. Double click the Service Diagnostics desktop
shortcut or fi nd the software in All Programs to
launch the software.
NOTE: Computer may prompt a restart after installing
the machine driver. Decline the restart, close Service
Diagnostics, and relaunch Service Diagnostics.
NOTE: Confi rm key switch is ON and check USB cable
connection to the machine if the screen below appears
on the computer screen.
4. The Service Diagnostics tool now connects to the
control module network.
5. The Service Diagnostics tool automatically detects
a new interface module installation if a new
interface module was installed. Enter the model
and serial number and then click the arrow button.
6. Inspect the actual machine confi guration and
match applicable confi gurations from the drop-
down menus and then click on the arrow button.
NOTE: Reconfi guration may take several minutes.
NOTE: Confi gurations may differ from what is shown,
depending on the options / features equipped on
the machine. If no interface module was installed,
this screen will appear fi rst. First confi rm there is no
Firmware update available. If a Firmware update is
available, the Firmware update should be done fi rst.