Tennant EC-H2O T12, Service Information Manual, Page: 157 / 178

T12 Service Information 9009917 (12-12)
5-25
SERVICE
5 . remove three flat head screws to disassemble the
brake assembly .
BET004
0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 160 170 180 190 200
BET006
New = 6.3mm (0.25in)
Minimum = 4.4mm (0.17in)
6 . measure the thickness of the brake rotor using a
vernier caliper . replace the rotor if it is less than
4 .4mm (0 .17in) thickness .
7 . reassemble the brake assembly and slide it back onto
the splined shaft .
BET008
8 . remove connection box cover screws and set cover
aside .
BET009