Tennant EC-H2O T12, Service Information Manual, Page: 149 / 178

T12 Service Information 9009917 (12-12)
5-17
SERVICE
WHEEL DRIVE ASSEMbLY
removinG Wheel Drive aSSembly
for Safety: before leaving or servicing machine, stop
on level surface, turn off machine and remove key .
for Safety: When servicing machine, jack machine
up at designated locations only . block machine up with
jack stands .
for Safety: When servicing machine, disconnect bat-
tery connection before working on machine .
1 .
2 .
3 .
4 .
5 .
6 .
key off . disconnect batteries .
jack front of machine and support using jack stands
or support blocks and chock rear tires .
remove steering plate mounting hardware (4) .
jack front of machine and remove jack stands or sup-
port blocks so wheel drive assembly is supported by
the floor .
remove front access panel and remove steering plate
mounting hardware (3) .
Loosen steering u-joint hardware and lift u-joint off
splined steering shaft .
NOTE: Drive assembly will not release. The steering plate
is secured to the main frame with (3) additional fasteners
from the top (see Step 5).