OPERATION
61
ATLV 4300 330510 (3
−
01)
PANEL FILTER KIT (OPTION)
The panel filter kit option helps to remove fine
debris and dust particles from the air while the
machine is operating.
To maximize performance and run time between
filter cleaning, use the main vacuum hose to spot
pick litter out of areas of severe dust.
Use the lower throttle speed 1 when possible
−
so
the machine takes less dust into the panel filter.
Vacuum with the bypass door open when dust
control is not required
−
this will insure maximum
run time between filter cleaning.
Purchase a spare filter panel for quick change out
in the middle of a shift. Both filters can then be
washed out at the end of the day and allowed to
dry overnight.
EMPTYING VACUUM BAG:
1. When the vacuum bag becomes full, shut off
the vacuum fan, turn off the machine set the
parking brake and remove key.
FOR SAFETY: Before leaving or
servicing machine, set the parking
brake, turn off machine and remove key.
2. Open the bypass door on the bottom of the
filter housing by pulling the two latch handles
down and rotating them 90
. This will allow
debris to fall from the filter housing.
