manualshive.com logo in svg

Tennant ATLV 4300, Operator'S Manual

Share
Download
Tennant ATLV 4300 Operator'S Manual Download Page 38

OPERATION

ATLV 4300 330510 (3

−

01)

36

Avoid bulky debris that may block vacuum hose;
tree branches, wire or large debris. Bulky items
can sometimes clog in the vac head; remember to
watch to see that they go up the hose and if not,
remove the hose and check for clogs.

Never leave a running machine unattended.
Always turn off fan, set parking brake, stop
engine, and remove keys before dismounting.

FOR SAFETY: Before leaving or
servicing machine, stop on level
surface, set parking brake, turn off
machine, and remove key.

Always shut off vacuum fan and engine before
unclogging debris.

Turn off the vacuum fan and shut down the engine
before emptying vacuum bag or opening the
debris hopper.

WARNING: Spinning fan. Stop engine
 before opening debris canister.

The rotating fan in the top of the debris cannister
can become clogged with light debris. Clean with
a broom when emptying bags.

Summary of Contents for ATLV 4300







































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands