Tennant ATLV 4300 Operator'S Manual Download Page 86

Page: 86 / 102

MAINTENANCE

ATLV 4300 330510 (12

−

01)

WATER DUST CONTROL (OPTION)

SPRAY NOZZLE

Check the spray nozzle daily for debris and
adjustment. Spray the vacuum fan housing out
with a garden hose daily to keep the debris
canister nozzle clean.

FOR SAFETY: Wear eye and ear
protection if using pressurized air or
water.

If the spray nozzle becomes blocked or clogged, it
will need to be removed and cleaned.

CLEANING AND ADJUSTING THE SPRAY
NOZZLE

1. Stop the machine, set the parking brake and

turn off the machine power.

FOR SAFETY: Before leaving or
servicing machine, stop on level
surface, set the parking brake, turn off
machine and remove key.

2. Turn the plastic nozzle head 1/4 turn

counterclockwise and pull striaght out to
remove it.

3. Remove and clean the spray nozzle filter

screen.

Summary of Contents for ATLV 4300







































































































Search results

Summary of Contents for ATLV 4300

Reviews:

Brands by name

Popular brands

Tennant ATLV 4300, Operator'S Manual

Search results

Summary of Contents for ATLV 4300

Reviews:

Brands by name

Popular brands