TENNANT A60
English
1043504
rev
01
- 55 -
6.
USING THE HIGH-PRESSURE LANCE
The high-pressure lance (optional) can be used to clean the sweeper vehicle with water from
the water tanks. In this way the necessary cleaning work can be carried out in every desired
location. The connections for the high-pressure lance are at the rear of the cabin on the right-
hand side.
When the water tank runs empty during the use of the high-pressure lance, the
water pump must be switched off to prevent damage.
1)
Bring the vehicle to a halt.
2)
Engage the hand brake (fig. 7, no. 7).
3)
Deactivate all engaged functions.
4)
Check the water level on the information display (see section 3.7).
5)
Inside the cabin switch on the water pump
(fig. 6, no. 25).
6)
Take the high-pressure lance in your hand.
The high-pressure lance is now ready for use. Before using the lance, refer to the original
operating manual supplied with the vehicle.
7)
After working with the high-pressure lance:
-
Switch off the water pump inside the vehicle.
