background image

 

TENNANT A60

 

 

 

 

 

English  

1043504 

rev 

01 

 

- 11 -

2.

 

SAFETY 

The A60 sweeper vehicle has been manufactured according to current requirements. 
Nevertheless, this vehicle can form a hazard to persons or vehicles if: 

-

 

it is not used according to the operating instructions, 

-

 

it is not operated by qualified personnel, 

-

 

it is altered or modified inexpertly, 

-

 

the safety regulations are ignored. 

 
Therefore, any person involved in the operation, maintenance and repair of the A60 sweeper 
vehicle must read the safety regulations and measures described in this chapter and adhere to 
them. 
 
Also applicable are: 

-

 

generally recognized safety and traffic regulations, and 

-

 

national stipulations. 

2.1.

 

Safety symbols 

The safety symbols on the vehicle must be kept complete and legible. 
Damaged or illegible safety symbols must be replaced. 
 
1. 

 

Fixed next to the driver's seat on the screen in the 
centre of the cabin. 
Dimensions (hxw): 50x100 mm 

2. 

 

Fixed on the rear of the cabin above the flashing 
warning light. 
Dimensions (hxw): 50x150 mm 

3. 

 

Fixed above the inspection hatches on the front, rear 
and both sides of the dirt hopper. 
Dimensions (hxw): 250x100 mm 

4. 

 

Fixed on the brushes of the sweeping unit and on the 

third brush (optional)

Dimensions (hxw): 240x90 mm 

 
 

Do not place objects 

on the driver’s seat.

 

First insert safety pin 
before moving under 

hopper. 

DO NOT APPROACH 

SWEEPER IN 

ACTION 

Always wear gloves 

when handling brushes 

Summary of Contents for A60



















































































Reviews: