EN
ENGLISH
12
750 (08–02)
D:
BLOW DRYING AND SQUEEGEEING
NOTE: The use of the “Formula 720 Rinse” agent will
help reduce the need and time required for blow drying
surfaces.
1.
Using the glass squeegee tool (supplied with
machine), wipe clean the mirrors if applicable
(Figure 19).
FIG. 19
2.
Unwrap the gray blower hose from the machine
handle and connect it to the rear of machine as
shown. Then attach the blower nozzle to the hose
(Figure 20).
ATTENTION: Do not use black recovery hose
when blow drying. Contaminates will be blown
into the air.
FIG. 20
3.
Press the vacuum/blower switch towards the
blower symbol to activate the blower (Figure 21).
FIG. 21
4.
Begin blow drying the surfaces from top to bottom,
directing the rinse solution to the floor. When
finished, shut off blower, wipe off hose and replace
it on machine (Figure 22).
FIG. 22
5.
Assemble the double–bend wand, attach
squeegee tool and connect wand to black
recovery hose. Connect the black recovery hose
to front of machine as shown (Figure 23).
FIG. 23
6.
Press the vacuum/blower switch towards the
vacuum symbol (Figure 24).
FIG. 24
