Tennant 515, Operator'S Manual

Page: 68 / 84

MAINTENANCE
515 MM420 (4--96)
66
3. Remove the ringed pin, deflector, gasket,
retainer bracket, and retainer strip from the
end of the squeegee.
4. Pull off the squeegee assembly cover.
5. Pull the squeegee blade off the squeegee
frame.
6. Replace or rotate the squeegee to allow a
new edge to face the front of the machine.
7. Slide the squeegee blade onto the squeegee
frame.
NOTE: Lubricating the squeegee frame where
the squeegee makes contact will make it easier to
install the squeegee blade.
8. Slip the retainer strip into the squeegee
blade. Slip the retainer bracket on the end of
the squeegee frame. Place the squeegee
gasket on the end of the squeegee frame
with the long end down and back.
9. Replace the squeegee assembly cover.
10. Replace the deflector and the ringed pin.
11. Adjust the rear squeegee as described in
LEVELING THE REAR SQUEEGEE and
ADJUSTING REAR SQUEEGEE BLADE
DEFLECTION .
SIDE SQUEEGEES BLADES
The side squeegees control water spray and
channel water into the path of the rear squeegee.
Check the side squeegees for damage and wear
daily.
Replace the side squeegee blades whenever they
become damaged or lose their shape or
resiliency. Replace the squeegee deflectors
whenever they become worn.
05943
05945