MAINTENANCE
71
515 MM420 (6--00)
TRANSPORTING THE MACHINE
1. Position the rear of the machine at the
loading edge of the truck or trailer.
2. If the loading surface is not horizontal or is
higher than 380 mm (15 in) from the ground,
use a winch to load machine.
If the loading surface is horizontal AND is
380 mm (15 in) or less from the ground, the
machine may be driven onto the truck or
trailer.
3. To winch the machine onto the truck or
trailer, attach the winching chains at the
bottom of the rear bumper.
If the machine has the optional rear tie down
brackets, attach the winching chains to
them.
FOR SAFETY: When loading machine
onto truck or trailer, use winch. Do not
drive the machine onto the truck or
trailer unless the loading surface is
horizontal AND is 380 mm (15 in) or less
from the ground.
4. Position the machine onto the truck or trailer
as far as possible. If the machine starts to
veer off the centerline of the truck or trailer,
stop and turn the steering wheel to center
the machine.
Summary of Contents for 515
Page 1: ...515 MM420 Rev 09 Operator Manual ...
Page 49: ...OPERATION 47 515 MM420 9 98 ...
Page 84: ...INDEX 515 MM420 6 00 82 ...
