Tennant 515, Operator'S Manual

Page: 51 / 84

MAINTENANCE
49
515 MM420 (3--99)
Interval Key Description Procedure
Lubricant/
Fluid
No. of
Service
Points
100 Hours
4 Tires Check for damage -- 3
100 Hours
14 Propelling gearbox Check lubricant level GL 1
14 Front wheel support Lubricate SPL 2 14 Front wheel support
bearing
Lubricate SPL 2
6 Scrub head parallel Lubricate SPL 8(4) 6 Scrub head parallel
arm pivot points
Lubricate SPL 8(4)
Steering universal joint Lubricate SPL 2
11 Brakes Check adjustment -- 1
15 Rear squeegee caster Lubricate SPL 1
500 Hours
13 Vacuum fan motor Check motor brushes -- 2(3)
500 Hours
12 Steering gear chain
H
Check tension and lubricate GL 1
14 Front wheel
H
Torque wheel nuts -- 1
6 Scrub head gas spring Check for wear and operation -- 1
1000
Hours
14 Propelling gearbox
H
Change gear lubricant GL 1 1000
Hours
14 Propelling gearbox
H
Change fill-level plug seals -- 1
9 Scrubbing brush drive Check motor brushes -- 2(3) 9 Scrubbing brush drive
motors
Check motor brushes -- 2(3)
14 Propelling motor Check motor brushes -- 1
SPL -- Special lubricant, Lubriplate EMB grease (Tennant part no. 01433--1)
GL -- SAE 90 weight gear lubricant
NOTE: Also check procedures indicated (
H
) after the first 50-hours of operation.