IB 328299 (11--2011)
2
EN
English
DISASSEMBLE MACHINE:
1. Remove the electrical panel. (Fig. 1)
NOTE
:
Mark back of the electrical panel with wire
locations to make later reassembly easier.
FIG. 1
2. Remove the access panel. (Fig. 2)
FIG. 2
3. Loosen the set screws from the bracket inside
the steering weldment. (Fig. 3)
FIG. 3
4. Disconnect the main wire harness from the
touch panel assembly.
5. Pull the touch panel assembly out from the
steering assembly. (Fig. 4)
FIG. 4
6. Remove the 1--11/16 in jam nut from the
steering assembly. (Fig. 5)
FIG. 5
7. Remove the steering wheel. (Fig. 6)
FIG. 6