OPERATION
2Ć9
1186E MM268 (6–94)
PARKING BRAKE LEVER
The parking brake lever
controls the brake
on the front wheel.
To set the parking brake, step on the lever and
release it into the long notch on the left. To
release the parking brake, step on the lever and
release it into the short notch on the right.
Always park on a level surface, stop the motor,
and set the parking brake before leaving the
machine unattended and before working on the
machine.
SQUEEGEE LEVER
The squeegee lever controls the position of the
rear squeegee.
To raise the squeegee, lift the lever into the up
position. To lower the squeegee, lower the lever
into the down position.
SIDE BRUSH ARM
The side brush arm
controls the position of
the side brush.
To raise the side brush, pull the lift arm up and
push it back into the raised position. To lower the
side brush, pull the arm forward and release it into
the down position.
When parking the machine, always raise the
brush to prevent the brush bristles from taking a
set.
A
03135
RAISING SIDE BRUSH ARM
A. Side Brush Arm
THERMO-SENTRY
The Thermo-Sentry
is a thermostat that senses
the temperature of the air drawn into the vacuum
fan from the hopper. The thermostat controls a
motor shut off switch. In the event of a fire in the
hopper, the high air temperature would cause the
thermostat to trip, stopping the motor cutting off
air flow to the fire. After the thermostat has
tripped, it must be manually reset by pressing the
reset button on the sensor.
A
03152
THERMO-SENTRY
A. Thermo-Sentry
Summary of Contents for 1186E
