TM-12E/13E/13R
EN-16
6. Keep you insulated from the object waiting for
measuring.
7. Do not operate the meter under the environment with
explosive gas (material), combustible gas(material)
steam or filled with dust.
8. In order to avoid reading incorrect data, you have to
replace the batteries immediately when the symbol
BAT appears on the LCD.
9. In order to avoid the damage caused by
contamination and static electricity, do not touch the
circuit board before you take any adequate action.
7. MAINTENANCE NOTES
7.1. BATTERY REPLACEMENT
1. If the symbol"BAT"is shown on the display while
measuring, you have to replace the batteries.
2. Remove all test leads and the conductor under test
before performing of battery replacement.
3. Set the range to OFF position.
4. Remove the screws from the battery cover with
screwdriver, and detach the battery cover from the
bottom cover.
5. Remove the batteries from battery holder carefully,
(replace them with new batteries UM-4 or SIZE 1.5V
x 2).
6. Attach the battery cover back to its right place, and
tight it with screws.
