TM-12E/13E/13R
EN-15
⚫
If the equipment is used in a manner not specified
by the manufacturer, the protection provided by the
equipment may be impaired.
⚫
Do not touch or be close to the inductive clamp when
measuring current.
⚫
Individual protective equipment (for example:
Insulation gloves) must be used when measuring
current.
⚫
CAT
Ⅳ
- Is for measurements performed at the
source of the low-voltage installation.
⚫
CAT
Ⅲ
- Is for measurements performed in the
building installation.
⚫
CAT
Ⅱ
- Is for measurements performed on circuits
directly connected to the low-voltage installation.
⚫
CAT
Ⅰ
- Is for measurements performed on circuits
not directly connected to mains.
6. SAFETY PRECAUTION
CAUTION
Take extreme care for the following conditions while
measuring
1. Measuring voltage over 20V as it may cause human
body electricity conduction.
2. Measure AC power.
3. Do not measure voltage, current under humid or wet
environment.
4.
If any unusual condition of test leads’s end (metal
part). And attachment of the meter, such as
breakage, deformation, fracture, foreign substance,
No display, etc., do not conduct any measuring.
5. Do not contact any exposed metal (conductive) parts,
such as end of test lead, jack, fixing object, circuit
etc,.
