TM-12E/13E/13R
EN-12
4.3. AC VOLTAGE (ACV) MEASUREMENT
WARNING
Maxim input for DCV or ACV is 600V. Do not attempt
to take any voltage measurement that exceeds the
limits. Exceeding the limits could cause electrical
shock and damage the clamp meter.
1.
Select “V~" range.
2. Insert the test leads into the jacks. The red test lead
plug into V/
Ω
jack, and the black test lead plug into
COM jack.
3. Connect the two long ends of test leads to the
desired circuit, and then reading will be displayed.
4. If the reading is difficult, Press DATA HOLD button to
hold the obtained value. To exit from this function,
press DATA HOLD button again.
4.4. DC VOLTAGE (DCV) MEASUREMENT
WARNING
Maximum input for DCV or ACV is 600V. Do not
attempt to take any voltage measurement that
exceeds the limits. Exceeding the limits could cause
electrical shock and damage the clamp meter.
1.
Select “ V” range.
2. Insert the test leads into the jacks. The red test lead
plug into V/
Ω
jack and the block test lead plug into
COM jack.
3. Connect the two long ends of test leads to the
desired circuit.
4. If the reading is difficult, press DATA HOLD button to
hold the obtained value. To exit from this function,
press DATA HOLD button again.
