4 Tendo MyUnit Settings
4.1 Setting the Wireless Sensor Unit in Tendo MyUnit App
If you change the Wireless Sensor Unit's settings while the Tendo MyUnit is offline (e.i, the
Wireless Sensor Unit is not yet connected to the Tendo MyUnit app), the sensor unit changes its
settings once the application is connected to the sensor unit.
If the Tendo MyUnit app is already connected to the Wireless Sensor Unit, the sensor unit's
settings change immediately.
Both the Tendo MyUnit app and the Wireless Sensor Unit retain the settings in memory, i.e. even
after the unit is turned off and the application is closed and restarted, the last saved setting
remains.
Click the “
Settings icon
” in the app, located in the top right corner of the screen.
Parameters you can set:
•
Audio Signals
: Set your training range, to signalise you your lack of intent, fatigue and when a
new maximum is reached
Minimum training range
- The lower limit of the audio signal
Maximum training range
- The upper limit of the audio signal
•
Minimum movement threshold
- Minimum length of movement of the sensor unit’s cord,
necessary for the system to display the measurement. Movements with a range of motion less
than the chosen value will not be displayed. Such as movements involving taking the weight of
the rack or the floor.
•
Maximum work rest time between reps
- It is a minimum length of movement of the sensor
unit’s cord, necessary for the system to display the measurement. The movements with a range
of motion less than the chosen value will not be displayed. Such as movements involving taking
the weight of the rack or the floor.
•
Range for partial AVG Power & Peak Force
- Measure a limited range of motion for calculation
of partial average power and peak force. E.g. to emphasise Rate of Force Development (RFD)
•
Imperial Units for load (lbs)
- Turn ON/OFF weight input in pounds
12