Tendercare Snappi Pushchair User Manual Download Page 34 | Manualshive

Page: 34 / 76

background image

Snappi System User Manual

Document No: 053-05 v38

Page 34 of 76

June 2022

Snappi System User Manual.doc

5.6 Fitting a Butterfly/Chest Harness or H-Belt Harness (Optional)

The Butterfly harness comprises a padded
section that sits against the user’s chest, two
shoulder and two bottom straps. Either the
shoulder or the bottom straps are locked in a
position to suit the user and then final adjustment
is made on the opposite straps.

The harness is designed to provide comfortable
postural support for the user.

Fig 5.6.1

Alternatively an H-Belt hanress is available, which
comprises 4 padded straps that join together with
a quick release buckle to provide easy open and
release of the harness.

Important:

The harnesses fitted are for postural

support only and must not be used as a vehicle
harness. Please see section 13 for transport
instructions.

Fig 5.6.2

Fig 5.6.3

If  the  Snappi  was  not  originally
supplied  with  either  harness  then  you
will  need  to  purchase  and  fit  the
relevant  cam  buckle  fixing  points  (Fig
5.6.3) to the rear of the seat.

•

For the Thomas Hilfen butterfly

harness purchase 20mm cam
buckles.

•

For both the H-Belt Harness

and Kinetic Balance harnessing
purchase 25mm cam buckles.

«
...
32
33
34
35
36
...
»

Summary of Contents for Snappi Pushchair













































































Reviews:

No comments

Related manuals for Snappi Pushchair

Brand: Easy Heat Pages: 4

Brand: Fantech Pages: 2

Brand: GCE Pages: 24

Brand: Mamas & Papas Pages: 24

Brand: Mamas & Papas Pages: 24

Brand: Samson Pages: 124

Brand: Samson Pages: 86

Brand: VAC Pages: 5

Pulsafeeder MPC Vector

Brand: Idex Pages: 114

Brand: Sentiotec Pages: 45

Brand: Danfoss Pages: 36

Brand: Invacare Pages: 44

Revolution FA-M3 R

Brand: YOKOGAWA Pages: 57

Brand: MSA Pages: 309

McDonnel & Miller 157S-RBP-MD

Brand: Xylem Pages: 8

Brand: iceqube Pages: 2

Brand: Monosem Pages: 68

AQ Logic Series

Brand: Bernard Controls Pages: 88

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands