Wireless Modem Router User Guide
- 39 -
IP over Ethernet (IPoE)
If your ISP uses DHCP to assign your IP address or if your ISP assigns you a static (fixed) IP address, IP subnet mask
and the gateway IP address, you need to select the IP over Ethernet (IPoE).
Click
Advanced Setup -> WAN Service -> Add,
select the configured interface and then click
Next
to enter the
following screen.
1.
Select IPoE.
2.
Edit the
Enter Service Description.
This field is optional. We recommend that you keep the default.
3.
Select a network protocol: IPv4, IPv6 or IPv4 & IPv6 (dual stack).
4.
Click
Next.
_________________________________________________________________________________________________
Note:
If you select IPv6 or IPv4 & IPv6 (dual stack), skip to
IPv6
.
_________________________________________________________________________________________________
Obtain an IP address automatically:
This allows the router to automatically acquire IP information from your ISP
Summary of Contents for D151
