Wireless Modem Router User Guide
- 46 -
Leased Time (hour):
The lease time is a time length that the IP address is assigned to each device before it is
refreshed.
Start interface ID/End interface ID:
Specify the start/end interface ID Interface ID does NOT support ZERO
COMPRESSION "::". Please enter the complete information. For exampe: Please enter "0:0:0:2" instead of
"::2".
Enable RADVD:
The RADVD (Router Advertisement Daemon) implements link-local advertisements of IPv6
router addresses and IPv6 routing prefixes using the Neighbor Discovery Protocol (NDP) and is used by system
administrators in stateless autoconfiguration methods of network hosts on Internet Protocol version 6 networks.
Check the checkbox to enable the RADVD.
Enable ULA Prefix Advertisement:
If enabled, the router will advertise ULA prefix periodically
Randomly Generate:
If selected, address prefix can be automatically generated.
Statically Configure:
If you select this option, you need to manually configure the address prefix and life
time.
Prefix:
Specify the prefix.
Preferred Life Time (hour):
Specify the preferred life time in hour.
Valid Life Time (hour):
Specify the valid life time in hour.
Enable MLD Snooping:
MLD is used by IPv6 routers for discovering multicast listeners on a directly attached link.
If disabled on layer2 devices, IPv6 multicast data packets will be broadcast on the entire layer2; if enabled, these
packets will be multicast to only specified recipient instead of being broadcast on the entire layer2.
_________________________________________________________________________________________________
Tip:
If you change the LAN IP address of the device, you will lose your connection to the device. You must type the new IP
address into your browser address field to log in to the device and set all gateway addresses of the LAN PCs to this new
address to access Internet.
Be sure to
write the new address on a sticky label and attach it to the bottom of the unit. You
will need the new address to log in to the device in the future.
_________________________________________________________________________________________________
4.2.4 NAT
This section explais the following:
•
Virtual Server
•
Port Triggering
•
DMZ Host
Virtual Server
The Virtual Server is useful for web servers, ftp servers, e-mail servers, gaming and other specialized Internet
applications. When you enable the Virtual Server, the communication requests from the Internet to your router’s WAN
port will be forwarded to the specified LAN IP address.
Summary of Contents for D151
