Wireless Modem Router
82
Network Authentication:
Select Open, Shared, WPA-PSK, WPA2-PSK or Mixed WPA/ WPA2-PSK from the
drop-down list to encrypt your wireless network.
Depending on the type of network authentication you select, you will be prompted to enter corresponding settings.
WEP Encryption:
Select Enabled or Disabled.
Encryption Strength:
Select 128-bit or 64-bit.
Current Network Key:
Select a network key to be active.
Network Key 1/2/3/4:
Enter 13 ASCII characters or 26 hexadecimal digits for 128-bit encryption keys; enter 5 ASCII
characters or 10 hexadecimal digits for 64-bit encryption keys.
WPA/WAPI passphrase:
Enter a WPA/WAPI network key.
WPA Group Rekey Interval:
Specify a key update interval.
WPA/WAPI Encryption:
Select AES or TKIP+AES.
4.3.3 MAC Filter
The MAC-based Wireless Access Control feature can be used to allow or disallow clients to connect to your wireless
network.
Allow:
Only allow PCs at specified MAC addresses (in the list) to connect to your wireless network.
Deny:
Block only PCs at specified MAC addresses from connecting to your wireless network.
Disable:
Disable this feature.
Add:
Click to add a MAC address.
To delete an existing MAC address, first check the
Remove
box next to the MAC address in list and then click the
Remove
button.
Example 1: To allow only the PC at the MAC address of 00:1A:3D:9C:BB:23 to connect to your wireless network, do as
follows:
Select
Allow
.
Click the
Add
button.
Enter 00:1A:3D:9C:BB:23 in the MAC address box as shown in the figure below:
Summary of Contents for 6932849430219
