Wireless Modem Router
64
IP Version:
Select either IPv4 or IPv6.
Destination IP address/prefix length:
Enter the destination IP address and prefix length of the final destination.
Interface:
Select an interface from the drop-down list.
Gateway IP address:
Enter the gateway IP address, which must be a router on the same LAN segment as the router.
Metric:
Enter a number in the Metric field. This stands for the number of routers between your network and the
destination.
Apply /Save:
Click to apply and save your settings.
_________________________________________________________________________________________________
Note:
1. Destination IP address cannot be on the same IP segment as WAN or LAN segment as the router.
2. Only configure additional static routes for unusual cases such as multiple routers or multiple IP subnets located on
your network. Wrong static routes may lead to network failure.
3. For system created route, the 'Remove' checkbox is disabled.
_________________________________________________________________________________________________
4.2.9 DNS
DNS Server (Static DNS)
The DNS server translates domain names to numeric IP addresses. It is used to look up site addresses based on their
names.
Select DNS Server Interface from available WAN interfaces OR enter static DNS server IP addresses for the system.
Here you can configure the WAN DNS address:
For IPv4:
-Click the Select DNS Server Interface from available WAN interfaces option
-OR select the
Use the following Static DNS IP address
option and enter static DNS server IP addresses for the system
And then click
Apply/Save
.
Summary of Contents for 6932849430219
