Tenda 6932849430219 User Manual Download Page 39

Page: 39 / 115

Wireless Modem Router

_________________________________________________________________________________________________

Note:

1. DNS Server Interfaces can have multiple WAN interfaces served as system DNS servers but only one will be used

according to the priority with the first being the highest and the last one the lowest priority if the WAN interface is

connected. Priority order can be changed by removing all and adding them back in again.

2. In ATM mode, if only a single PVC with IPoA or static IPoE protocol is configured, Static DNS server IP addresses

must be entered.

3. If you cannot locate the static DNS server IP information, ask your ISP to provide it.

_________________________________________________________________________________________________

Confirm your settings and then click

Apply/Save

to apply and save your settings. Your settings will then be displayed on

the screen below:

To Set up WAN Service for ETH Interface

If you select and configured the

ETH Interface

(Ethernet uplink), follow steps below to configure the WAN service:

Two Internet connections: PPP over Ethernet (PPPoE) and IP over Ethernet (IPoE) are available in the Ethernet uplink

mode.

_________________________________________________________________________________________________

Tip:

eth0, eth1, eth3 and eth3 respectively represent the LAN port1, LAN port2, LAN port3 and LAN port4 of the device.

_________________________________________________________________________________________________

Summary of Contents for 6932849430219




















































































































Search results

Summary of Contents for 6932849430219

Reviews:

Related manuals for 6932849430219

Brands by name

Popular brands

Tenda 6932849430219, User Manual

Search results

Summary of Contents for 6932849430219

Reviews:

Related manuals for 6932849430219

Brands by name

Popular brands