Wireless Modem Router
22
1.DNS Server Interfaces can have multiple WAN interfaces served as system DNS servers but only one will be used
according to the priority with the first being the highest and the last one the lowest priority if the WAN interface is
connected. Priority order can be changed by removing all and adding them back in again.
2. In ATM mode, if only a single PVC with IPoA or static IPoE protocol is configured, Static DNS server IP addresses
must be entered.
3. If you cannot locate the static DNS server IP information, ask your ISP to provide it.
_________________________________________________________________________________________________
Here you can view your configurations. Click
Apply/Save
to save your settings if everything is correctly set.
When the PPPoE connection is successful, you can access the Internet.
IP over Ethernet (IPoE)
If your ISP uses DHCP to assign your IP address or if your ISP assigns you a static (fixed) IP address, IP subnet mask
and the gateway IP address, you need to select the IP over Ethernet (IPoE).
If you have selected the
EoA
from the
ATM Interface
screen in
Layer2 Interface
, you will see the screen below when
you click the
WAN Service
tab, select the configured interface and click
Next
.
Summary of Contents for 6932849430219
