9
4 Control of the receiver
The receiver is ready for operation when the master switch on the rear
side is in position "I". If the switch is in position "0" the satellite system
is completely disconnected from its power supply.
For normal TV operation the following functions can be selected with
the remote control (see page 7):
Satellite system on and off (stand-by).
The antenna retracts when system is switched off.
In this stand-by mode, timer programs are not monitored.
MUTE
If this button is pressed for more than 3 seconds, the
satellite system switches into stand-by mode WITHOUT
retracting the antenna (sleep mode).
If the timer is programmed, the sleep function will set the
timer into stand-by mode.
A short press mutes the sound or turns it back on.
P+/CH
P-/CH
Change to the previous or next channel in the channel
list. These keys are also used to navigate within menus or
lists.
TV
RADIO
Change between TV and radio mode.
In TV mode, the antenna will move into the position of the
last known reception if no satellite signal is received while
the key is pressed.
+/VOL
—/VOL
Volume up/down.
These keys are also used to navigate within menus or to
scroll the pages of lists.
MENU
Opens the settings menu for the current program and the
system menu. Press MENU again to directly open the main
menu.
