49
Automat. satellite-swap:
When set to "Active", the system will check
at every program change whether the new program selected is to be
received from a satellite other than the current one. If such a satellite
change is recognized, the system will automatically adjust to the new
satellite.
To deactivate the automatic satellite-swap, set the setting to "Off".
This may be necessary if the automatic satellite-swap does not
function because of weak signals or if you prefer to perform a manual
search (see "Automatic satellite-swap" on page 52).
Sleeptimer:
When in stand-by mode, the antenna will be retracted and
switched off when the sleep-timer is activated. When set to
Sleep
mode
, the system is switched into the sleep mode by the sleep-timer
without retracting the antenna (see page 7).
The regular timer programmes (see page 22) are only executed in sleep
mode and are inactive in stand-by.
Reset search parameters:
Select this menu item and confirm it with OK
when you assume that your satellite system does no longer reliably find
the selected satellite via the automatic search or the search via
location. The satellite search function is reset to the default settings.
Please note that the first search after a parameter reset may take quite
a long time. This function should hence only be used after due
consideration.
