37
16 Channel search
The automatic search function of the receiver scans the individual
satellites or, alternatively, the DVB-T channels for new channels.
Channels already included in the channel list are automatically
updated in case of any changes. Depending on the settings in "Edit
Settings
Æ
General Options", encrypted channels may be ignored (see
page 31).
When the mobile search is started, all DVB-T channels are first deleted
from the channel list (see page 28).
Starting the channel search
To start the channel search, select MENU, Main menu, channel list,
then option channel search.
Select a satellite (or DVB-T) from the list that you wish to search for
new channels and confirm your selection with OK. Note that the
antenna must be aimed at this satellite and that a signal must be
received. To receive DVB-T signals, a suitable antenna must be
connected.
Wait until the search has been completed. During the channel search,
technical details of the scanned channels and the number of channels
found are displayed. A search may well take approx. 15 minutes.
After the search is completed, the channel-selection window will be
displayed.
Channel-selection window
This window shows the channel list on the left-hand side and the new
channels on the right-hand side. Press TV or RADIO to switch between
the TV and radio channels. Use SWAP to switch between the windows.
The left-hand column shows the existing channel list. Use the SWAP
key to toggle between the channel list on the left and the channel
selection list on the right. To edit a station or new channel, press OK: