48
Stand-by mode:
When the system is set to "Convenient", it can be re-
activated from stand-by mode by pressing the red key on the remote
control. The stand-by mode is indicated by a green dot or hyphen in the
satellite-mouse display.
When the system is set to "Energy Save", the remote-control
receiver and the green dot are switched off when the system is
switched into stand-by mode. In this case, the system cannot be
switched back on with the remote control. To switch the system
back on, press both keys of the satellite mouse (LED display)
simultaneously.
LED display upside down:
If set to "Yes", the channel number will be
displayed bottom-up. This is useful if the satellite mouse is mounted
upside down. Channel numbers are then seen in their normal position.
Setting "No" must be selected if the satellite mouse is mounted in the
normal position
Activate top box:
When the system is switched on, the top box
(antenna unit) is usually activated immediately and the antenna is
being aimed at the satellite. To prevent this, set this menu item to
"Off". This may be useful if you are in a location where no satellites can
be received but you do wish to use the PVR or +T (optional) functions.
The antenna unit can be activated at any later point by selecting
Oyster/CARO/Cosmo Digital ...
and then
Activate top box
.
Search satellite:
This option allows the selection of the satellite that
the system is to search for when being switched on or when the
automatic search or the search by location is initiated. Several
satellites covering different regions and offering programs in different
languages are available. Please note that not all satellites can be
received in all locations. (See appendix 'Search satellites' on page 61).