Tornado G4 User Manual
39
6.
Re-assemble the QTF. NOTE: Some QTFs may have
spacers that are too wide (>12.7mm/.5in) to fit the
Tornado mounting slots. Discard these spacers.
7.
Use the QTFs to secure the mounting bars to the
luminaire base.
Check that the luminaire is centered and that the ends of
the mounting bars are parallel.
Install Luminaire in the Tornado Base
Now take the luminaire, with mounting bars, and install
into the Tornado enclosure base, using the 8mm carriage
bolts, washers and nuts you removed at the start of this
process.
