Tornado G4 User Manual
38
Quarter-Turn Fasteners (QTF)
Many luminaires with omega clamps do NOT have
threaded mounting holes. In this case:
1.
Use a hammer to knock out the steel pin from the
omega clamp quarter-turn fasteners.
2.
Remove the QTF from the omega clamp.
3.
If there is a spacer on the QTF, remove and discard it
4.
Re-assemble the QTF and replace the pin (tap home
with a hammer)
5.
Use the QTFs to fasten the mounting bars to the
luminaire base.
TIP: If the QTFs are not tight, take them apart and add a
flat washer to pack out the length.
Discard spacers like this
