Temperature@lert TM-WIFI220, User Manual

Page: 12 / 42

11 |
Rev 2.1 for firmware 5.0+ | http://www.temperaturealert.com/ | © 2011 Temperature@lert
Default IP Address
10.99.99.1
Default Username and Password
Username : admin
Password : password
You will see the current sensor reading along with a graph. This page will
automatically refresh itself every few minutes. If you do not see a sensor
reading or the reading is 0.00000, please see the
Obtaining Service and
Support section of this document.
It is highly recommended that you click on the Preferences tab and set a new
administrative password.