TEMA TELECOMUNICAZIONI
AD639R VoIP SIP PoE Repeater
MAS-AD639R-REV00EN
Page 16 of 30
9.3. Network parameters
On this page it is possible to set the network parameters, such as IP address, netmask, etc.:
The default IP address of the device is
192.168.0.10/24
. Gateway and DNS are only needed if you want the device
to have the ability to access the Internet (for example to get the current date / time, in the example from the site
time.nist.gov).
The changes to the network settings are taken over by the device until the next reboot. Once you have completed
the configuration steps so be sure to reboot the system and if necessary, change the network segment of your
computer so that it can connect to the new address.
•
IP address
: specify the IP address you want to assign to AD639R.
•
Subnet mask
: indicate the subnet mask to be assigned to AD639R.
•
Default gateway
: indicate the gateway that can enable AD639R to access to internet.
•
Primary and secondary DNS server
: indicate the addresses of two DNS servers you want to use to resolve
IP addresses.
•
Time server
: indicate the address of the server you want to use for time synchronization device.
•
Test address (ping)
: if inserted, this address is used by the system to verify the correct operation of the
network connection. It is advisable to enter the address of your PBX, checking before if it responds to ping
requests.
•
Device description
: text that will appear on the Adam software search mask.
